Manage Your Mega-Massive Music Library By Ditching iTunes And Your External Hard Drive

December 14, 2015

I loved iTunes. Up until pretty recently, too. But you know what? Fuck iTunes. What used to be the most intuitive and seamless experience has turned into a glitchy piece of shit that freezes whenever I try to do something as simple as search for a record or play a song. It won’t let me do anything quickly, which is both iTunes’ and my fault, though. My music library lives on an external FireWire hard drive and is roughly 1.5 TB, which is admittedly pretty fuckin big. But decent software should be able to handle this; iTunes can’t because it’s bloated, trying to be a comprehensive media manager & store. I know others have jumped ship well before me and there are tons of other articles about the why and how, but I haven’t seen too many address the biggest issue I’ve had: a huge, cumbersome music library. So that’s what I hope to do with this post, let you know where I was, where I’m at now, and why I’m much happier.

My previous setup was pretty straightforward. My (2011?) Macbook spent most of its time sitting plugged in at my desk where it could be connected via FireWire to my Western Digital MyBook Studio 3 TB external hard drive. The hard drive had both my digital music as well as the iTunes library and database files. Eventually I got fed up and started looking for other software & storage solutions. So many people had recommended getting a NAS (network attached storage) setup, so that seemed like the next obvious move for storage. Software was a bit more problematic, because as most of you probably know, there’s not a whole lot of decent iTunes alternatives out there, especially for Macs. I did tons of research on which NAS brand/model to buy and the software that would replace iTunes, and ended up with this:


qnap ts-251swinsian


Storage: QNAP TS-251 NAS (Intel Celeron 2.41GHz, 8 TB (2 x 4 TB), 4GB RAM) – $669
Software: Swinsian – $20


Why the QNAP TS-251 & Swinsian?

There are tons of reasons why you might prefer a NAS over a straight external hard drive, but the big draws for me were being able to access the content anywhere (anywhere at home, anywhere away from home) and not having to worry about my external hard drive dying and having to buy a new drive and restore my cloud backups, which is a a huge stress and a major pain in the ass.

The big debate seems to be between QNAP or Synology for your NAS brands. I opted for QNAP because of this review and lots of recommendations. I knew I wanted 2 hard drive bays so I could run a RAID system which allows the two drives to mirror each other without any extra work on my part. This means when one drive has a little glitch or if a file gets corrupted or anything like that, the QNAP will replace the broken info on one drive with the good stuff on the other drive. I wanted a decent amount of RAM and not an Intel Atom processor because I plan on streaming movies off of the QNAP in the near future as well. Which is also why I chose to get a model with an HDMI output, which is not a common feature. I wanted 4 TB of storage because that gives me a little room to grow from my 1.5G TB music and less than 1 TB of video, and I chose to buy the drives pre-installed because buying just the empty NAS case and then getting the drives separately ended up costing about the same. Lots of other nice stuff about this model, too, like hot-swappable drives. Depending on what you’re doing, you can get away with a much cheaper model than what I got.

Swinsian was the only software I actually downloaded and tried out. The rest of the stuff I looked at from a distance via reviews and such, and that’s because I could tell just from reading that so many of the other apps wouldn’t suit my needs. I wanted something that looked visually similar to iTunes (namely, being able to browse by album artwork), I wanted to be able to stream content via AirTunes/AirPlay, I wanted to be able to sync my iPod Classic, and ideally, I would be able to import my iTunes data so I wouldn’t lose play counts, playlists, and the like. Swinsian does all of this, and it claims it’s “designed to be responsive even with the largest libraries.” It’s one of the few apps that costs a decent amount of money ($20) but it comes with a full featured 30 day trial, so I didn’t have to drop the money blindly.


Setting Up

Setting up the QNAP was pretty much as easy as taking it out of the box and turning it on. I had some weird network issues that were unrelated to the QNAP but eventually got things running and accessible via my Macbook. QNAP has a nice web interface where you can do everything from file and sever management to running apps and stuff. After the initial setup, I plugged my external hard drive directly into the QNAP via USB and copied over the entire contents using QNAP’s web file manager. I had some errors when copying which I’m 99% sure were due to insanely long file names/paths. I ran some queries on my external hard drive to identify the extra long ones, then I edited them down, and was successful in copying everything over to the QNAP.

To test things out, I tried running iTunes from the QNAP over wifi. Since my previous setup involved storing my library & database files on the external hard drive (instead of on my Macbook), I did the same with the QNAP. Shit results. Moving the library & database files to my Macbook but keeping the media on the QNAP resulted in better performance, but still worse than when I was running everything from my external. But at least everything was working.

Next was setting up Swinsian to work with the QNAP. This is where shit got crazy. Like I mentioned before, Swinsian has the option to import your iTunes library so you can retain iTunes specific metadata. I tried this and it seemed to go ok. It didn’t take very long (still, multiple hours) to import the library XML (side note: if you don’t have an iTunes library XML file because you’re using the newest version of iTunes, which changed from XML to ITL files for its library/database, you can easily & quickly export your library as an XML file in iTunes to import in Swinsian, which will only import an XML). However I quickly realized some of my music was unavailable. When I had Swinsian reveal the file in Finder, it was looking for my external hard drive. Apparently iTunes was still using some of the music on the external hard drive instead of the QNAP. I have no fucking clue why this happened.

My first (unsuccessful) step to resolve this was to go back into iTunes and consolidate my library so iTunes would know all the music was on the QNAP. My library was too big for this to work, it kept hanging, crashing, and throwing errors. So I said fuck it, I don’t need my iTunes specific data, I’ll start over and just have Swinsian scan the QNAP directories for my music. This took forever but eventually looked like it was finished scanning. It wasn’t. Swinsian was showing songs in the library with no ID3 tags save for the mp3 filename, it wouldn’t play those songs (they had a running time of 00:00), and it wasn’t showing everything. I tried this QNAP directory scan a couple times to make sure it wasn’t just Swinsian. It wasn’t just Swinsian (although I think it was part of the problem). Apparently the files from my external hard drive didn’t get copied over to the QNAP properly the first time I was setting it up (even though I’m fucking certain they did). So I connected the external drive to the QNAP and repeated the copying process, choosing to skip files with the same filename. I had Swinsian scan the QNAP again and still ran into problems, so once again, I said fuck it. I returned to iTunes, but instead of working with my same library as before, I created a new library by pointing iTunes at the QNAP. That way I had a library file that knew where all my music was. I imported that XML library to Swinsian, and finally have non-iTunes software that can access all my music on my NAS.

All of that scanning and importing and copying took a fuckton of time. I typically would let something run overnight when I knew I wouldn’t be using my music the next day. At most, I think a scan/import/etc took less than 24 hours with a wired ethernet connection.

Speaking of wired connections, once I realized my wifi was garbage, I decided I needed to connect everything directly (Macbook -> router, router -> NAS). That’s not to say you can’t do this wirelessly. I’m pretty sure some weird shit is happening in my home which is a combination of old busted routers and every type of signal interference you can think of. So your mileage will absolutely vary.


Playing with Swinsian

I’m way into this app. It’s super fast. Like, super fast. None of the lagging jumpy glitchfest that is iTunes. Searching is a breeze, everything happens more or less instantaneously. That bit about being responsive with even mega-massive libraries is 100% true. Editing tags is the best. Again, it’s super quick & easy, especially if you have the tag editor frame open all the time (which is a killer feature). It supports Regex, which is a ridiculously robust search and replace function that has a decent learning curve, but when you don’t have Doug’s AppleScripts anymore, you’re probably going to want to take advantage. Swinsian basically does everything you used iTunes for: album art fetching, smart playlists, Last.FM scrobbling, gapless playback, AirTunes/AirPlay streaming, etc. It also does lots that iTunes couldn’t do, like support for FLAC and multiple genres (!!!).

However, Swinsian isn’t perfect (yet). I do have some complaints…

-AirTunes/AirPlay streaming only allows streaming to one AirPlay device at a time, which sucks when you have 2 or more AirPlay devices. Not only that, but when Swinsian is streaming to AirPlay, it doesn’t even play the music back locally! That’s some stupid shit.

-Swinsian doesn’t use any of the Sort ID3 tags that iTunes used. This is a huge fucking blow considering how much time I spent and how many files I have that use those fields. That means if you want to sort by artist’s last names, or if you have artists that use weird punctuation, you’re fucked. It can’t even handle the preceding periods in “…And You Will Know Us By The Trail Of Dead.” This will take some major re-evaluating of my cataloging practices, which I’ve already spent plenty of time evaluating.

-It doesn’t handle iOS devices, so iPhones, iPads, and newer iPods still need to be synced with iTunes (although this isn’t a problem for me because I don’t put music on my iPhone, and my iPod is an iPod Classic, which Swinsian can handle).

-Swinsian doesn’t rip CDs. Not a huge problem. Other software, like XLD, is fine for this.

-I exported my playlists from iTunes and imported them (and recreated the smart playlists) in Swinsian, so I didn’t loose that info, but play counts, date added, and a lot of other metadata that I relied on in iTunes is gone. This isn’t a complaint on Swinsian features, more about its inability to scan 1.5 TB of music accurately.

So yeah, these things suck, but they’re sacrifices I’m willing to make because of how dysfunctional iTunes became for my purposes.



Absolutely without a doubt worth the effort to toss the bogus bloated Apple mess and unreliable external hard drives for a fast, stable, and accessible Swinsian/NAS setup. Anyone can do this, and should if you have an unwieldy music collection.

While setting stuff up, I went back and forth a hundred times between iTunes and Swinsian. Just when I thought I had shit under control, something else went wrong and I had to revert to iTunes. This was a huge time suck because my libraries got out of sync between apps and it got really hard to keep track of. So a really important tip is to make note of the exact size of your library in a variety of ways (number of songs, number of albums, number of GB, etc.), that way when you get Swinsian loaded up, you can make sure you’re not missing anything.

I haven’t spent a ton of time with Swinsian yet. I’m sure there will be more things I run into that I love/hate the longer I use it. But I also am convinced that it will get better over time, instead of getting worse like iTunes.

I wrote all of this from memory. I didn’t plan on writing this post until after I finished everything and some folks were like “tell me what you did!” So there’s probably parts of this process that aren’t chronological or slightly inaccurate. Sorry!

I’m happy to talk more about this. I glazed over plenty (like how to make a new iTunes library) because I figured you could Google anything you didn’t know. If you have questions or anything like that, comment or email or Twitter or whatever.

Leave a Reply

Your email address will not be published. Required fields are marked *

14 comments on “Manage Your Mega-Massive Music Library By Ditching iTunes And Your External Hard Drive

  1. Wow, this is a really detailed, useful post. I’m currently using a Drobo (6 years and counting) but it is starting to show its age. With GigE common now, and power-over-ethernet, I think I need to move to a NAS model. That, and I hate iTunes.

    Anyway, thanks for the details & explanations.

  2. Thank you!

  3. Great post!

  4. Martin Jun 15, 2016

    Your post made me switch from iTunes to Swinsian and it has most of all been a pleasant experience. The good tagging and fantastic speed is amazing to have back into the game again.

    Not all has been smooth though. Swinsian still seems to suffer from some pesky bugs. I have contacted them about it, so hopefully they will be resolved.
    1) Only twice (after using Swinsian daily for about two–three months) have I been able to actually quit the program in normal way: I always have to force quit.
    2) The search field becomes inactive from time to time and never works inside the Playback Queue.
    3) When automatically adding new songs to Swinsian, the first track usually don’t get added successfully with tags intact. I often have to re-write them manually.
    4) After removing doubled artist names, the old name can still be seen until Swinsian is restarted.

    I am curious to see if you are still using Swinsian or maybe moved onto something else (Roon seems to be the name of the day)? And also curious to see if you have had the same encounter with unresolved bugs?

    Best regards

  5. antigravitybunny Jun 15, 2016

    Thanks for the comment, Martin! I don’t think I’ve had those same issues you’ve mentioned. I’ve definitely had the problem with the search in the playback queue, but I think that’s it. The rest don’t sound familiar at all.

    That being said, I had to take a break from Swinsian because I jumped the gun on my new music/network setup, totally fucked everything up, and had to revert to the old ways temporarily. I’m just about ready to implement the new setup though, and planned on ditching iTunes for Swinsian, but I hadn’t heard of Roon. It looks amazing! Except that it costs $119 a year. That’s insane. I’ve never heard of consumer-based music management software costing so much. I can’t imagine that will be sustainable for them. But who knows? I think I’ll stick with Swinsian and tough out the bugs because currently almost anything is better than iTunes.

  6. Martin Jun 16, 2016

    Thanks for the response. Yeah, that price for Roon is what keeps me from even trying out the trial version, but I agree, it looks fantastic. There is a lifetime membership for $500, but I still find it a bit steep.

    Roon Labs seems more aimed at the hifi crowd, who need to pay a high price in order to feel calm (and they have also partnered with many hifi manufacturers which offers streaming via Roon).

  7. Chris K. Jun 21, 2016

    I was sorry to hear you say that you still have to revert to iTunes to copy songs to an iPhone. That’s one of the biggest reasons I want an alternative to iTunes, because it’s hell to try to copy songs with iTunes (no command-line interface, horribly hang-ridden drag-and-drop, constant random skipping of copying songs, etc.) Really horrible.

  8. Ashley May 11, 2017

    Hey, just wondered, how are you getting on with your music these days? Have you made any tweaks?

  9. antigravitybunny May 30, 2017

    Still loving Swinsian, especially how fast it is and how easily it handles editing metadata. I haven’t really made any tweaks but I have gotten more used to Swinsian and the various ways its interface differs from iTunes. Having used Swinsian for a year and a half now, I’ll never go back to iTunes. Swinsian gets updated regularly with actual improvements to functionality instead of just adding more bloat. And the developer is very open to suggestions and bug reports (which I rarely come across). I have a slightly different workflow for adding music and getting it onto my iPod and that sort of thing, but that’s not really an improvement or anything, just due to using different software.

  10. John Zuill Aug 3, 2017

    Im not sure I like Swinsian but its lovely to hear other people bitching about iTunes. Im not … alone. (sniff)

  11. David Jan 1, 2018

    howdy :) thanks for the nice article, I found your page searching around for ways to manage large volumes of music because I was on the brink of a TB or so of data and now a friend of mine has gifted me his collection too, which is also about a tb. while his was slightly more organized than mine (which is not saying much) and I have been very shabby about collecting my music (it mostly ended up in a file on a pc computer and is now partially on an external and partially on my new Mac) anyways, I have always hated Itunes and I dj so generally I use dj software to listen to music on but it’s only good as far as the tagging is. I do a lot of sorting by bpm and key which my programs will update on their own, but I have a lot of stuff that I get like singles from artists, or when I buy stuff from Beatport or bandcamp a lot of times it’s just one long string in the title like 32359824532_artist_trackname
    which drives me crazy but usually im too busy at the moment to go thru and change them im working on a set or something, and because I don’t deal with it right then and a year later im like fuuuuuuuuuuuuuuck I have like 500 things to rename, is there a way to do this more efficiently than editing each one by hand? I tried the program that you suggested and it was pretty sweet, good for finding the duplicates anyways so thanks for that! plz help! haha I want my stuff to be more organized again…

  12. Jamie at WWOZ May 12, 2019

    I’m working with 650k songs as I use Itunes for my radio show. Lately the latency between songs is up to five seconds and getting slower with each new big add of music. I’m desperate to keep my star ratings and meta data while using a new music player software. Any updates to this article???

  13. Rachel Menzies Oct 15, 2019

    Hi there! I’m thinking about taking the leap from iTunes over to Swinsian and would love to hear how you’re getting on all these years later with new developments etc? Would you recommend it for a company who searches for music on a regular and will need remote access and shared tags etc?

    Thanks so much in advance!

  14. Thomas Jun 5, 2020

    hi! short Questions About Swinsian:
    if i want to add some new Songs, where i can Import them (and will be placed then automatically to my liberary ?) Have not find it?
    Thanks !